**Factory 2nd meaning there may be blemishes on the dish surface, unrecognizable to most unlookers. Functionality and durability is not compromised in the slightest.
New models include an updated retaining nut compatible with BOTH V1 and InfiniTi/HALO™ Sapphire Inserts!
WE DO NOT recommended for use with ANALOG controllers, however it still can be done, if done correctly
Completely interchangeable with The Quartz HALO™ - uses all the same bases, carb caps, inserts, and other accessories!
Compatible ONLY with D-NAiL® Flat Coil Heaters. Dish must be used with a nail base, and is compatible with all D-NAiL® V1 series bases, the NEW D-NAiL® Slim Series, as well as the Highly Educated InfiniTi. Choose "Dish Only" only if you would like to use a compatible nail base that you already own. Several nail base options are available. To use this nail for convection-based vaporization, pair it with our sapphire insert (InfiniTi/SiC size) - the insert rests securely on a shelf just above the hot quartz surface.
NOTICE: To clean, heat to 900°F for 2-3 hours depending on how much cleaning the dish needs. Many customers have reported increased satisfaction when “q-tip tech” is used to maintain the dish between cleaning cycles. D-NAiL® cannot support torch cleaning due to the wide variety of methods and types of torches available. Torch Clean At Your Own Risk.
Compatible with all D-NAiL® V1 series titanium nail bases
Compatible with D-NAiL® Slim Series modular nail base
Compatible with Highly Educated InfiniTi
Compatible with Sapphire Insert for InfiniTi/HALO™ (as a convection shelf)
Compatible with D-NAiL® Universal Titanium Carb Cap
Nail Base Options:
NO BASE - I already own a compatible base
Select this option only if you already own one of the following nail bases that you intend to use with your new HALO™ dish:
D-NAiL® V1, V1.2, or V1.3 titanium nail base
D-NAiL® Slim Series titanium nail base
Highly Educated InfiniTi
D-NAiL® Slim Series
The D-NAiL® Slim Series is a modular nail base design compatible with a wide variety of male and female joint sizes and most D-NAiL® dishes. Includes heat sink, heater retainer, and locking nut (all of which are required to function) and two interchangeable joints/bases (in your choice of sizes.) You can choose two different bases to fit multiple rigs or two of the same to have a spare, depending on your needs. If you're not sure which to choose, we suggest the 14/18M 10F Base and 14/18F Base for the widest range of compatibility.
For information about the D-NAiL® Wik™ Surface, check our info page HERE!